pot-produit-seul-peinture

 

crea-couleur-spatule

Créa’COLOR Spatule is a float finish coloured resurfacer containing resin and silica. This self-levelling compound turns old asphalt and concrete into decorative surfaces in one application. It gives new life to driveways, terraces, parking spaces. It does not require a primer on asphalt.

Please fill in our contact form for MSDS request.

Additional Information

• Self-levelling float finish coloured resurfacer containing resin and silica.

• Transforms worn, pitted asphalt and damaged concrete terraces into attractive coloured surfaces. • Gives new life to weathered asphalt surfaces. • Highlights danger zones. • For external use.

• No primer required except in cases mentioned under “Application”. • Can be applied directly to an old asphalt surface or to a tiled floor. • Waterproofing membrane provides durability. • Excellent grip – adhesion test: meets ISO 2409 standards. • Very good abrasion resistance – 3M abrasive pad test: meets ISO11998 standards. • Good stain resistance – internal procedure: meets ISO9001-LRV-M1220 standards. • High resistance to cleaning agents – internal procedure: meets ISO9001-LRV-M1221 standards. • Resistant to cracks and impact. • Resistant to air pollution, acidic water outflow. • Excellent resistance to U.V. and weathering – artificial weathering test – Xenon lamp – Solarbox (1,000 hours): meets ISO11341 standards. • Suitable for pedestrian and light vehicle traffic. • Anti-slip – skid resistance test: meets EN 1339/2003 standards. • Can withstand large variations in temperatures: – Water immersion / freeze cycle resistance test – internal procedure: meets ISO9001 – LRV- M1231 standards. – Water immersion/dry cycle resistance test – internal procedure: meets ISO9001-LRV- M1224 standards. • Excellent stability – stability test in pot – internal procedure: meets ISO9001-LRV-M1236 standards. • High resistance to rain – wash test – internal procedure: meets ISO9001-LRV-1223 standards.

• The surface must be dry and smooth, free of loose material. • Apply only in dry, ambient conditions (between 15°C and 25°C). In warmer conditions, dry hot surfaces must first be dampened by spraying water. • If the surface is too porous, apply the primer Créa’PRIM. • When applied to smooth concrete or faience, first pickle the surface, then apply the primer. • Stir the product vigorously in the bucket, pour onto the floor and spread using a float trowel to achieve a smooth finish. Use circular or linear motions. The trowel should always remain in contact with the surface. Wipe it regularly. Work with small sections. Warning: only go over the surface once when applying the product to avoid stripping the coating. If it should happen, add fresh product and repeat the procedure.

• Black, Safety Green, Leaf Green, Metal Grey, Red Ochre, Yellow Ochre, Brick Red, Oxide Red, Safety Red, Stone, White, Safety Yellow.

• 20 kg plastic bucket / 33-bucket pallet.

• Coverage per m²: – 3 to 4 kg on new asphalt surface / concrete slab. – 4 to 5 kg on old asphalt surface or concrete slab covered with gravel. • Application: 2 to 3 mm in one layer. • Drying time at 20°C: – Touch dry in 30 minutes. – Dry weather conditions: 12 to 24 hours. – Open to traffic: 24 to 48 hours. • Density: 1.71 ± 0.05. • pH: 7.71 ± 0.05. • Dry extract content (without pigments): 83.90 %. • Grain size: 0.1 / 0.6. • Dilution: water. • Odour: none. • Equipment cleaning: with water. • Surface cleaning: with high pressure washer. • Application temperature: from 15°C. • VOC content : < 1 % of the product composition.

• Customs code: 3209 10 000. • Labelling: none.

• Must be stored in its sealed original packaging, between 5 °C and 25 °C. • 2-year shelf life.